Powder coating of automotive and motorcycle metal parts in Tallinn

Powder coating of automotive metal parts and motorcycle components for enthusiasts and workshops in Tallinn and Harju County (workshop in Vatsla, 5 minutes from Õismäe): subframes, control arms, brake calipers, valve covers, motorcycle frames and swingarms. We agree on the part’s suitability, required preparation, masking and priming after assessment. Sandblasting and zinc priming are charged separately. Tank acceptance requirements are agreed separately.

Automotive and motorcycle parts powder coating — JS Production OÜ
BENEFITS

Why choose powder coating for automotive and motorcycle parts?

Chassis and engine bay parts are exposed to moisture, road salt, stone chips and technical fluids. We select the coating and surface preparation according to the part’s material and service conditions.

Coating selected for intended use

Paint is selected for expected heat and contact with technical fluids. Limits depend on the specific coating; curing temperature is not the operating temperature of the part.

Surface preparation and zinc primer

Sandblasting and zinc priming are selected for the material and condition of the part. Both are priced separately from coating.

Precision protection of threads & mating surfaces

We carefully mask bearing seats, threads, cylinder working surfaces and precision surfaces with dedicated heat-resistant plugs and tapes.

WORKFLOW & PROCESS

How does powder coating of automotive and motorcycle parts work?

Preparation is selected according to the condition of the metal and its intended use. Sandblasting and zinc priming are priced separately. Possible work stages:

1

Media blasting

Where needed, we remove old paint, rust and other contamination using suitable surface preparation. We assess whether sandblasting is appropriate based on the part’s material and condition.

2

Masking threads & bearings

Piston surfaces, bearing seats and threads are masked with dedicated heat-resistant plugs and tapes.

3

Zinc-rich primer

The need for zinc primer depends on the material and intended use. Priming is priced separately from coating.

4

Powder coating

RAL colour, texture and any clear coat are agreed when ordering, taking the part’s intended use into account.

RELATED SERVICES

Preparing automotive and motorcycle parts for coating

Sandblasting and a suitable primer help prepare parts for coating. The need for these treatments depends on the material and condition; both services are charged separately from coating.

FAQ

Frequently asked questions about automotive and motorcycle powder coating

Answers to common questions about prep, heat resistance, and masking:

Powder coating is used to restore appearance and protect metal parts. Preparation and paint type depend on the material, heat and intended use. Chemical and temperature limits are checked for the selected coating.

All parts must be dismantled: pistons, rubber seals and bleed nipples must be removed from brake calipers. Before coating and sandblasting, we mask bearing seats, threads and sealing surfaces with dedicated heat-resistant tapes and silicone plugs.

We assess coating a frame in one piece by dimensions, material and hanging arrangement. Send photos and dimensions before delivery. Tank acceptance requirements are agreed separately.

Caliper treatment is agreed after assessing material and condition. The part must be dismantled. Heating depends on the coating and the part’s suitability; in-service temperature limits are checked separately.

Work typically takes 1–3 business days, but timing depends on the condition and quantity of parts and the amount of masking required. We agree on the exact completion time before work begins.
FAST RESPONSE IN 1–2 HOURS

Need auto or moto parts powder coating?

Send us part dimensions, photos, or parts list and we will reply promptly with a quote. Workshop in Vatsla (5 mins from Õismäe).